|
4 Keithley Metrabyte MID-64
Data Aquisition Boards
Characteristics:
The MID-64 METRABUS Driver board interfaces the METRABUS
system to the PC. It allows a single PC expansion slot to control up
to 32 external METRABUS I/O boards. This allows a single board to interface
to 512 digital or 256 analog I/O points. Programming the METRABUS system
is very simple because the interface board generates all required timing
and control signals. A 50-pin connector extends out the rear of the
PC and connects to the METRABUS cable. The 50 conductor cable connects
the METRABUS interface boards and power supply to the driver board.
The cable carries all data, address, and control signals as well as
power. Ground conductors are interleaved between all signal lines to
increase system noise immunity.
The METRABUS system has been designed to allow cable lengths up to 100
feet. Applications which require communication
at distances greater than 100 feet should use the REM-64 remote driver
card or INTMD64 stand-alone controller. The MID-64 uses 8 consecutive
addresses. The addresses are set by a DIP switch located on the boards.
Equipment Notes:
All 4 Boards are new in the box and each includes both
manuals shown. We only took pictures of one for the auction.
If you needed only one board - let us know. If this auction is
not successful we may relist in singles.
Manufacturer PDF
Warranty:
This item is sold with
a 3 Day Satisfaction Guarantee. So bid with confidence.
As our many customers will attest, we will do our very best to resolve
any customer problems. But our official policy is:
This item comes with a 3 day right of return policy.
All returns must be made within 3 days of receipt.
All warranties are void if the calibration / warranty seals are broken.
Equipment must be shipped correctly and returned with all accessories.
Customer is responsible for all shipping charges on returns.
Foreign Buyers please be aware: We offer no warranty or returns on items
shipped outside the USA
Payment,
Shipping & Bidding:
Buyer will pay $15.00 packing and
shipping in the continental United States. Payments accepted are Paypal ,
cashiers checks and money orders only. No international buyers
unless Paypal verified. Please feel free to contact us if you
need other arrangements.
We will make every effort
to ship within 24 hours of receipt of payment. We ship with FedEx &
UPS only. We will be glad to ship with other carriers using the purchasers
shipping account. Please contact us to make any special shipping arrangements.
For shipping rate research, our shipping address is Boulder, CO USA
---- Zip Code is 80305.
Many of our auctions have a set
packaging and shipping fee. This set fee makes the transaction
easier and allows the purchaser to send payment at once without having
to wait for a shipping total. This is our best guess on an unpackaged
item. Please consider the total with shipping when you are bidding.
Foreign buyers: Unless special provisions have been made, you are responsible
for making your own shipping arrangements and all costs related to customs,
duties & special packaging requirements. Please do not ask us to quote
you international shipping rates. Use the address information above
to research you own shipping rates. You can email sales@ascentconcepts
(no spam) .com to get the packaging fee, package weight and size for
your research. Items sold outside the USA are sold as is.
Bidders - with no feedback
or less then 80% positive feedback must contact us through the eBay
email system before placing a bid. We will reply through the same system,
documenting that you have been approved to bid. If you do not follow
these procedures, your bid will be cancelled.
All other bidders, bid with confidence.
About Us:
Ascent Concepts and Technologies
is a Research & Development Lab. As a service to the companies and institutions
we work with, we broker their excess equipment & act as application
specialists on their new equipment needs. We are now offering quality
used equipment to the public with the same level of professionalism
and service.
Please feel free to email
at thomasknox@ascentconcepts (no spam) .com or call Thomas @ 1-303-554-0307
with any Technical questions. Please feel free to email at waltwhite@ascentconcepts
(no spam) .com or call Walt @ 1-720-276-8288 with any Shipping or Logistical
questions. We make every effort to evaluate and guarantee our equipment.
Although we do not provide NIST traceable calibration, we do have extensive
in house calibration equipment and make every effort to test and verify
performance on equipment we sell. However we do not warranty any items
shipped outside the USA.
|
