5347A 20 GHz
Microwave Counter / Power Meter
This instrument combines
a microwave frequency counter and RF Power Meter. The counter
will cover 10 Hz to 20 GHz frequency range. The Power meter range
is dependent on the sensor chosen. The unit works with most, if
not all of the 848x series sensors.
Manual is included but not in the photos.
Power Sensor Cable is included but no power sensors are included
006 Microwave Level Limiter.
011 HP-IB Interface.
We ran this instrument
through its paces in our lab. It performs flawlessly and is in
excellent physical condition.
MRSP - With options was over $10,000.00
Range: 500 MHz to 20 GHz
500 MHz - 12.4 GHz: -32 dBm (-35 dBm typical) 12.4 GHz - 20.0
GHz: -27 dBm (-32 dBm typical)
Input: +7 dBm Damage Level: +25 dBm, peak SWR 500 MHz - 12.4 GHz:
<2:1 typical 12.4 GHz - 20.0 GHz: <3:1 typical
▒1 LSD ▒time base error x frequency
1 Hz or 10 kHz, selectable
Optional Increased Damage
Level Opt 006
Protects Input 1 from damage by limiting high level signals. All
specifications are the same except Input 1.
Level 500 MHz to 6 GHz: +39 dBm (8 watts) 6 GHz to 18 GHz: +36 dBm
(4 watts) Sensitivity reduced by 3 dBm, 500 MHz to 12.4 GHz 4 dBm,
12.4 GHz to 20.0 GHz
Range: 10 Hz - 525 MHz
25 mV rms (15 mV rms typical)
1 Mohm nominal shunted by <70 pF (10 Hz to 80 MHz) or 50 ┘ nomimnal
(10 MHz to 525 MHz)
Level: 50 ┘ or 1 M┘ dc - 5 kHz: 250V (dc + ac peak) >5 KHz: 5.5V
rms (+28 dBm) + 1.25 x 106 Vrms/FREQ
▒1 LSD ▒[(1.4 x Trigger Error/Gate Time) ▒Time Base Error] x frequency
1 Hz or 10 kHz, selectable
Automatic Amplitude Discrimination
the largest of all signals present, provided that signal is>6 dB (typical)
above any signal within 500 MHz; >20 dB (typical) above any signal within
500 MHz to 20 GHz.
Speed Resolution = 1 Hz, Speed = 1 MHz/sec Resolution = 10 kHz,
Speed = 1 GHz/sec Acquisition Time
= 1 Hz, Time = <125 ms Resolution = 10 kHz, Time = <60 ms Maximum
Deviation 20 MHz p-p, Automatic mode 60 MHz p-p, Manual mode (via
Maximum FM Rate: 10 MHz
Any modulation index provided the minimum signal level is not less
than the sensitivity specification.
Range: 0 MHz to 20 GHz, sensor dependent Power Range: -70 dBm to
+20 dBm (100 pW to 100 mW), sensor dependent
Range: 50 dB in 10 dB steps Resolution: 0.01 dB in logarithmic mode,
0.1% of full scale in linear mode.
Filter: The meter automatically selects the required number of averages
for the selected range.
Instrumentation: ▒0.02 dB or ▒5%
Set (digital settability of zero): ▒5% of full scale on most sensitive
range. Decrease percentage by a factor of 10 for each higher range,
▒1 display count.
This item is sold with
a 3 Day Satisfaction Guarantee. So bid with confidence.
As our many customers will attest, we will do our very best to resolve
any customer problems. But our official policy is:
This item comes with a 3 day
right of return policy.
All returns must be made within
3 days of receipt.
All warranties are void if
the calibration / warranty seals are broken.
Equipment must be shipped
correctly and returned with all accessories.
Customer is responsible for
all shipping charges on returns.
Foreign Buyers please be aware:
We offer no warranty or returns on items shipped outside the USA
Shipping & Bidding:
Buyer will pay $35.00 packing and shipping
in the continental United States. Payments accepted are Paypal,
cashiers checks and money orders only. No international buyers unless
paypal verified. Please feel free to contact us if you need other
We will make every effort
to ship within 24 hours of receipt of payment. We ship with FedEx & UPS only.
We will be glad to ship with other carriers using the purchasers shipping
account. Please contact us to make any special shipping arrangements.
For shipping rate research, our shipping address is Boulder, CO USA
---- Zip Code is 80305.
Many of our auctions have a set
packaging and shipping fee. This set fee makes the transaction
easier and allows the purchaser to send payment at once without having
to wait for a shipping total. This is our best guess on an unpackaged
item. Please consider the total with shipping when you are bidding.
Foreign buyers: Unless special provisions have been made, you are responsible
for making your own shipping arrangements and all costs related to customs,
duties & special packaging requirements. Please do not ask us to quote
you international shipping rates. Use the address information above
to research you own shipping rates. You can email sales@ascentconcepts
(no spam) .com to get the packaging fee, package weight and size for
your research. Items sold outside the USA are sold as is.
Bidders - with no feedback
or less then 80% positive feedback must contact us through the ebay
email system before placing a bid. We will reply through the same system,
documenting that you have been approved to bid. If you do not follow
these procedures, your bid will be cancelled.
All other bidders, bid with confidence.
Ascent Concepts and Technologies
is a Research & Development Lab. As a service to the companies and institutions
we work with, we broker their excess equipment & act as application
specialists on their new equipment needs. We are now offering quality
used equipment to the public with the same level of professionalism
Please feel free to email
at thomasknox@ascentconcepts (no spam) .com or call Thomas @ 1-303-554-0307
with any Technical questions. Please feel free to email at waltwhite@ascentconcepts
(no spam) .com or call Walt @ 1-720-276-8288 with any Shipping or Logistical
questions. We make every effort to evaluate and guarantee our equipment.
Although we do not provide NIST traceable calibration, we do have extensive
in house calibration equipment and make every effort to test and verify
performance on equipment we sell. However we do not warranty any items
shipped outside the USA