HP (Agilent) 5347A 20 GHz
Microwave Counter / Power Meter
This instrument combines a
microwave frequency counter and RF Power Meter. The counter will cover 10 Hz
to 20 GHz frequency range. The Power meter range is dependent on the
sensor chosen. The unit works with most, if not all of the 848x series
Manual is included but not in the photos.
Sensor Cable is included but no power sensors are included in auction.
Microwave Level Limiter.
We ran this instrument
through its paces in our lab. It performs flawlessly and is in excellent
MRSP - With options was over $10,000.00
500 MHz to 20 GHz
MHz - 12.4 GHz: -32 dBm (-35 dBm typical) 12.4 GHz - 20.0
GHz: -27 dBm (-32 dBm typical)
+7 dBm Damage Level: +25 dBm, peak SWR 500 MHz - 12.4 GHz: <2:1 typical 12.4
GHz - 20.0 GHz: <3:1 typical
Accuracy: ▒1 LSD
▒time base error x frequency
Resolution: 1 Hz
or 10 kHz, selectable
Optional Increased Damage Level
Opt 006 Protects Input 1
from damage by limiting high level signals. All specifications are the same
except Input 1.
Damage Level 500
MHz to 6 GHz: +39 dBm (8 watts) 6 GHz to 18 GHz: +36 dBm (4 watts)
Sensitivity reduced by 3 dBm, 500 MHz to 12.4 GHz 4 dBm, 12.4 GHz to 20.0
10 Hz - 525 MHz
mV rms (15 mV rms typical)
Mohm nominal shunted by <70 pF (10 Hz to 80 MHz) or 50 ┘ nomimnal (10 MHz to
Damage Level: 50
┘ or 1 M┘ dc - 5 kHz: 250V (dc + ac peak) >5 KHz: 5.5V rms (+28 dBm) + 1.25
x 106 Vrms/FREQ
Accuracy: ▒1 LSD
▒[(1.4 x Trigger Error/Gate Time) ▒Time Base Error] x frequency
Resolution: 1 Hz
or 10 kHz, selectable
Automatic Amplitude Discrimination
Automatically measures the
largest of all signals present, provided that signal is>6 dB (typical) above any
signal within 500 MHz; >20 dB (typical) above any signal within 500 MHz to 20
Resolution = 1 Hz, Speed = 1 MHz/sec Resolution = 10 kHz, Speed = 1 GHz/sec
Resolution = 1
Hz, Time = <125 ms Resolution = 10 kHz, Time = <60 ms Maximum Deviation 20
MHz p-p, Automatic mode 60 MHz p-p, Manual mode (via HP-IB only)
Maximum FM Rate: 10 MHz
Any modulation index provided the minimum signal level is not less than the
0 MHz to 20 GHz, sensor dependent Power Range: -70 dBm to +20 dBm (100 pW to
100 mW), sensor dependent
50 dB in 10 dB steps Resolution: 0.01 dB in logarithmic mode, 0.1% of full
scale in linear mode.
Auto Filter: The
meter automatically selects the required number of averages for the selected
Instrumentation: ▒0.02 dB or ▒5%
(digital settability of zero): ▒5% of full scale on most sensitive range.
Decrease percentage by a factor of 10 for each higher range, ▒1 display
This item is sold with a 3 Day
Satisfaction Guarantee. So bid with confidence.
As our many customers will attest, we will do our very best to resolve any
customer problems. But our official policy is:
This item comes with a 3 day right of
All returns must be made within 3 days
All warranties are void if the
calibration / warranty seals are broken.
Equipment must be shipped correctly
and returned with all accessories.
Customer is responsible for all
shipping charges on returns.
Foreign Buyers please be aware: We
offer no warranty or returns on items shipped outside the USA
Payment, Shipping &
Buyer will pay $35.00 packing and shipping in the continental United States. Payments
accepted are Paypal, cashiers checks and money orders
only. No international
buyers unless paypal verified. Please feel free to contact us if you need other
We will make every effort to ship
within 24 hours of receipt of payment. We ship with FedEx & UPS only. We will be glad
to ship with other carriers using the purchasers shipping account. Please
contact us to make any special shipping arrangements. For shipping rate
research, our shipping address is Boulder, CO USA ---- Zip Code is 80305.
Many of our auctions have a set packaging and shipping fee.
This set fee makes the transaction easier and allows the purchaser to send
payment at once without having to wait for a shipping total. This is our
best guess on an unpackaged item. Please consider the total with shipping
when you are bidding.
Foreign buyers: Unless special provisions have been made, you are responsible
for making your own shipping arrangements and all costs related to customs,
duties & special packaging requirements. Please do not ask us to quote you
international shipping rates. Use the address information above to research you
own shipping rates. You can email sales@ascentconcepts (no spam) .com to get the
packaging fee, package weight and size for your research. Items sold outside the
USA are sold as is.
Bidders - with no feedback or less
then 80% positive feedback must contact us through the ebay email system before
placing a bid. We will reply through the same system, documenting that you have
been approved to bid. If you do not follow these procedures, your bid
will be cancelled. All other bidders, bid with confidence.
Ascent Concepts and Technologies is a
Research & Development Lab. As a service to the companies and institutions we
work with, we broker their excess equipment & act as application specialists on
their new equipment needs. We are now offering quality used equipment to the
public with the same level of professionalism and service.
Please feel free to email at
thomasknox@ascentconcepts (no spam) .com or call Thomas @ 1-303-554-0307 with
any Technical questions. Please feel free to email at waltwhite@ascentconcepts
(no spam) .com or call Walt @ 1-720-276-8288 with any Shipping or Logistical
questions. We make every effort to evaluate and guarantee our equipment.
Although we do not provide NIST traceable calibration, we do have extensive in
house calibration equipment and make every effort to test and verify performance
on equipment we sell. However we do not warranty any items shipped outside the USA